Certificate Request Entity - HP FlexNetwork MSR Series Command Reference Manual

Predefined user roles
network-admin
Parameters
name: Specifies the trusted CA by its name, a case-sensitive string of 1 to 63 characters.
Usage guidelines
To obtain a CA certificate in a PKI domain, you must specify the trusted CA name. The trusted CA
name uniquely identifies the CA to be used if multiple CAs exist on the CA server specified for the
PKI domain.
Make sure the specified CA name is consistent with the name of the CA that owns the CA certificate
to be obtained.
Examples
# Set the name of the trusted CA to new-ca.
<Sysname> system-view
[Sysname] pki domain aaa
[Sysname-pki-domain-aaa] ca identifier new-ca

certificate request entity

Use certificate request entity to specify the PKI entity for certificate request.
Use undo certificate request entity to restore the default.
Syntax
certificate request entity entity-name
undo certificate request entity
Default
No PKI entity is specified for certificate request.
Views
PKI domain view
Predefined user roles
network-admin
Parameters
entity-name: Specifies a PKI entity by its name, a case-insensitive string of 1 to 31 characters.
Usage guidelines
A PKI entity describes the identity attributes of an entity for certificate request, including the following
information:
•
Common name.
•
Organization.
•
Unit in the organization.
•
Locality.
•
State and country where the entity resides.
•
FQDN.
•
IP address.
400