Disable - HP FlexNetwork MSR Series Command Reference Manual

Parameters
to-client: Specifies the direction from server to client.
to-server: Specifies the direction from client to server.
Usage guidelines
If you execute this command multiple times for the same NBAR rule, the most recent configuration
takes effect.
Examples
# Configure user-defined NBAR rule abcd to match packets from client to server.
<Sysname> system-view
[Sysname] nbar application abcd protocol http
[Sysname-nbar-application-abcd] direction to-server
Related commands
nbar application

disable

Use disable to disable a user-defined NBAR rule.
Use undo disable to restore the default.
Syntax
disable
undo disable
Default
A user-defined NBAR rule is enabled.
Views
NBAR rule view
Predefined user roles
network-admin
Usage guidelines
Use this command to disable a user-defined NBAR rule if the following conditions exist:
•
The NBAR rule will not be used in the foreseeable future.
•
You do not want to delete the NBAR rule.
Examples
# Disable user-defined NBAR rule abcd.
<Sysname> system-view
[Sysname] nbar application abcd protocol http
[Sysname-nbar-application-abcd] disable
Related commands
nbar application
display app-group
Use display app-group to display information about the specified application groups.
682