Display Attack-Defense Policy Ip - HP FlexNetwork MSR Series Command Reference Manual

Field
Ports
# Display brief information about all attack defense policies.
<Sysname> display attack-defense policy
------------------------------------------------------------
Policy Name
Atk-policy-1
P2
P123
Table 125 Command output
Field
Policy name
Applied list
Related commands
attack-defense policy

display attack-defense policy ip

Use display attack-defense policy ip to display information about IPv4 addresses protected by
flood attack detection and prevention.
Syntax
Centralized devices in standalone mode:
display attack-defense policy policy-name { ack-flood | dns-flood | fin-flood | flood | http-flood
| icmp-flood | rst-flood | syn-ack-flood | syn-flood | udp-flood } ip [ ip-address [ vpn
vpn-instance-name ] ] [ count ]
Distributed devices in standalone mode/centralized devices in IRF mode:
display attack-defense policy policy-name { ack-flood | dns-flood | fin-flood | flood | http-flood
| icmp-flood | rst-flood | syn-ack-flood | syn-flood | udp-flood } ip [ ip-address [ vpn
vpn-instance-name ] ] [ slot slot-number ] [ count ]
Distributed devices in IRF mode:
display attack-defense policy policy-name { ack-flood | dns-flood | fin-flood | flood | http-flood
| icmp-flood | rst-flood | syn-ack-flood | syn-flood | udp-flood } ip [ ip-address [ vpn
vpn-instance-name ] ] [ chassis chassis-number slot slot-number ] [ count ]
Views
Any view
Predefined user roles
network-admin
Description
Ports that are protected against the flood attack. This field displays port
numbers only for the DNS and HTTP flood attacks. For other flood
attacks, this field displays a hyphen (-).
Attack-defense Policy Brief Information
Description
Name of the attack defense policy.
List of interfaces to which the attack defense policy is applied. If the policy
is applied to the device, this field displays Local.
Applied list
GigabitEthernet1/0/1
GigabitEthernet1/0/2
GigabitEthernet1/0/3
None
GigabitEthernet1/0/2
835