Timer Response-Timeout (Radius Scheme View) - HPE FlexNetwork HSR6800 Security Command Reference

Number of users
500 to 999
1000 or more
Examples
# Set the real-time accounting interval to 51 minutes for RADIUS scheme radius1.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] timer realtime-accounting 51
Related commands
retry realtime-accounting

timer response-timeout (RADIUS scheme view)

Use timer response-timeout to set the RADIUS server response timeout timer.
Use undo timer response-timeout to restore the default.
Syntax
timer response-timeout seconds
undo timer response-timeout
Default
The RADIUS server response timeout period is 3 seconds.
Views
RADIUS scheme view
Default command level
2: System level
Parameters
seconds: RADIUS server response timeout period in seconds, ranging from 1 to 10.
Usage guidelines
If a NAS receives no response from the RADIUS server in a period of time after sending a RADIUS
request (authentication/authorization or accounting request), it resends the request so that the user
has more opportunity to obtain the RADIUS service. The NAS uses the RADIUS server response
timeout timer to control the transmission interval.
The maximum number of RADIUS packet transmission attempts multiplied by the RADIUS server
response timeout period cannot be greater than 75.
Examples
# Set the RADIUS server response timeout timer to 5 seconds for RADIUS scheme radius1.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] timer response-timeout 5
Related commands
retry
Real-time accounting interval (in minutes)
12
15 or longer
82