HPE FlexNetwork HSR6800 Security Command Reference page 202
Hide thumbs
Also See for FlexNetwork HSR6800:
- Configuration manual (503 pages) ,
- Command reference manual (153 pages) ,
- Product end-of-life disassembly instructions (2 pages)
Table of Contents
Advertisement
Parameters
addresslearned: Enables MAC address learning traps. The port security module sends traps when
a port learns a new MAC address.
dot1xlogfailure: Enables 802.1X authentication failure traps. The port security module sends traps
when an 802.1X authentication fails.
dot1xlogon: Enables 802.1X authentication success traps. The port security module sends traps
when an 802.1X authentication is passed.
dot1xlogoff: Enables 802.1X user logoff event traps. The port security module sends traps when an
802.1X user is logged off.
intrusion: Enables intrusion traps. The port security module sends traps when it detects illegal
frames.
ralmlogfailure: Enables MAC authentication failure traps. The port security module sends traps
when a MAC authentication fails.
ralmlogoff: Enables MAC authentication user logoff traps. The port security module sends traps
when a MAC authentication user is logged off.
ralmlogon: Enables MAC authentication success traps. The port security module sends traps when
a MAC authentication is passed.
NOTE:
RALM (RADIUS Authenticated Login using MAC-address) means RADIUS authentication based on
MAC address.
Usage guidelines
You can enable certain port security traps for monitoring user behaviors.
Examples
# Enable MAC address learning traps.
<Sysname> system-view
[Sysname] port-security trap addresslearned
Related commands
display port-security
189
Advertisement
Table of Contents
