Pki Validate-Certificate; Root-Certificate Fingerprint - HPE FlexNetwork HSR6800 Security Command Reference
Hide thumbs
Also See for FlexNetwork HSR6800:
- Configuration manual (503 pages) ,
- Command reference manual (153 pages) ,
- Product end-of-life disassembly instructions (2 pages)
Table of Contents
Advertisement
<Sysname> system-view
[Sysname] pki retrieval-crl domain 1
Related commands
pki domain
pki validate-certificate
Use pki validate-certificate to verify the validity of a certificate.
Syntax
pki validate-certificate { ca | local } domain domain-name
Views
System view
Default command level
2: System level
Parameters
ca: Verifies the CA certificate.
local: Verifies the local certificate.
domain-name: Specifies the name of the PKI domain to which the certificate to be verified belongs, a
string of 1 to 15 characters.
Usage guidelines
The focus of certificate validity verification will check that the certificate is signed by the CA and that
the certificate has neither expired nor been revoked.
Examples
# Verify the validity of the local certificate.
<Sysname> system-view
[Sysname] pki validate-certificate local domain 1
Related commands
pki domain
root-certificate fingerprint
Use root-certificate fingerprint to configure the fingerprint to be used for verifying the validity of the
CA root certificate.
Use undo root-certificate fingerprint to remove the configuration.
Syntax
root-certificate fingerprint { md5 | sha1 } string
undo root-certificate fingerprint
Default
No fingerprint is configured for verifying the validity of the CA root certificate.
Views
PKI domain view
249
Advertisement
Table of Contents
