Display Ike Sa - HPE FlexNetwork HSR6800 Security Command Reference

exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
This command displays the configuration information of all IKE proposals in the descending order of
proposal priorities.
Examples
# Display the settings of all IKE proposals.
<Sysname> display ike proposal
priority authentication authentication encryption Diffie-Hellman duration
--------------------------------------------------------------------------
10 PRE_SHARED
11 PRE_SHARED
default PRE_SHARED
Table 48 Command output
Field
priority
authentication method
authentication algorithm
encryption algorithm
Diffie-Hellman group
duration (seconds)
Related commands
•
authentication-method
•
ike proposal
•
encryption-algorithm
•
authentication-algorithm
•
dh
•
sa duration

display ike sa

Use display ike sa to display information about the current IKE SAs.
Syntax
display ike sa [ verbose [ connection-id connection-id | remote-address [ ipv6 ]
remote-address ] ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
method algorithm
SHA
MD5
SHA
Description
Priority of the IKE proposal.
Authentication method used by the IKE proposal.
Authentication algorithm used by the IKE proposal.
Encryption algorithm used by the IKE proposal.
DH group used in IKE negotiation phase 1.
ISAKMP SA lifetime (in seconds) of the IKE proposal.
algorithm group
DES_CBC MODP_1024
DES_CBC MODP_768
DES_CBC MODP_768
307
(seconds)
5000
50000
86400