Reset Firewall-Statistics; Aspf Configuration Commands; Aspf-Policy - HPE FlexNetwork HSR6800 Security Command Reference

interface interface-type interface-number: Clears the packet filtering statistics on the specified
interface of the IPv6 firewall.
Examples
# Clear the packet filtering statistics on GigabitEthernet 3/0/1 of the IPv6 firewall.
<Sysname> reset firewall ipv6 statistics interface gigabitethernet 3/0/1
Related commands
display firewall ipv6 statistics

reset firewall-statistics

Use reset firewall-statistics to clear the packet filtering statistics of the IPv4 firewall.
Syntax
reset firewall-statistics { all | interface interface-type interface-number }
Views
User view
Default command level
1: Monitor level
Parameters
all: Clears the packet filtering statistics on all interfaces of the IPv4 firewall.
interface interface-type interface-number: Clears the packet filtering statistics on the specified
interface of the IPv4 firewall.
Examples
# Clear the packet filtering statistics of IPv4 firewall on GigabitEthernet 3/0/1.
<Sysname> reset firewall-statistics interface gigabitethernet 3/0/1

ASPF configuration commands

aspf-policy

Use aspf-policy to create an ASPF policy and enter its view.
Use undo aspf-policy to remove an ASPF policy.
Syntax
aspf-policy aspf-policy-number
undo aspf-policy aspf-policy-number
Views
System view
Default command level
2: System level
Parameters
aspf-policy-number: Specifies an ASPF policy number in the range of 1 to 99.
368