Defense Scan Blacklist-Timeout; Defense Scan Enable - HPE FlexNetwork HSR6800 Security Command Reference

•

defense scan enable

•
defense scan max-rate

defense scan blacklist-timeout

Use defense scan blacklist-timeout to specify the aging time for entries blacklisted by scanning
attack protection.
Use undo defense scan blacklist-timeout to restore the default, which is 10 minutes.
Syntax
defense scan blacklist-timeout minutes
undo defense scan blacklist-timeout
Views
Attack protection policy view
Default command level
2: System level
Parameters
minutes: Aging time of blacklist entries, in the range of 1 to 1000, in minutes.
Examples
# Set the aging time for entries blacklisted by the scanning attack protection function to 20 minutes.
<Sysname> system-view
[Sysname] attack-defense policy 1
[Sysname-attack-defense-policy-1] defense scan blacklist-timeout 20
Related commands
•
blacklist enable
•
defense scan add-to-blacklist
•
defense scan enable
•
defense scan max-rate
defense scan enable
Use defense scan enable to enable scanning attack protection.
Use undo defense scan enable to restore the default.
Syntax
defense scan enable
undo defense scan enable
Default
Scanning attack protection is disabled.
Views
Attack protection policy view
Default command level
2: System level
423