Session-Time Include-Idle-Time - HPE FlexNetwork HSR6800 Security Command Reference

Default
The self-service server location function is disabled.
Views
ISP domain view
Default command level
2: System level
Parameters
url-string: URL of the self-service server, a string of 1 to 64 characters that starts with http:// and
contains no question mark. This URL was specified by the RADIUS server administrator during
RADIUS server installation.
Usage guidelines
With the self-service function, users can manage and control their accounts and passwords. Only the
RADIUS server systems provided by IMC support the self-service function.
Examples
# For ISP domain test, enable the self-service server location function, and specify the URL of the
self-service server for changing user password to http://10.153.89.94/selfservice.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] self-service-url enable http://10.153.89.94/selfservice

session-time include-idle-time

Use session-time include-idle-time to include the idle cut time in the user online time to be
uploaded to the server.
Use undo session-time include-idle-time to restore the default.
Syntax
session-time include-idle-time
undo session-time include-idle-time
Default
The user online time uploaded to the server excludes the idle cut time.
Views
ISP domain view
Default command level
2: System level
Usage guidelines
The device uploads to the server the online user time when a user is logged off. However, the online
user time of an abnormally logged-off user can contain an idle timeout interval or a detection interval
when the idle cut function or online portal user detection is enabled. You can configure the device to
include or exclude the idle cut time before the device uploads the online user time to the server
according to your accounting policy.
Examples
# Configure the device to include the idle cut time in the user online time uploaded to the server for
ISP domain test.
<Sysname> system-view
34