Password-Control Login-Attempt - HPE FlexNetwork HSR6800 Security Command Reference

undo password-control login idle-time
Default
You cannot use a user account to log in to the device if the account has been idle for 90 days.
Views
System view
Default command level
2: System level
Parameters
idle-time: Specifies the maximum account idle time in days, in the range of 0 to 365. 0 means no
restriction for account idle time.
Examples
# Set the maximum account idle time to 30 days.
<Sysname> system-view
[Sysname] password-control login idle-time 30
Related commands
display password-control

password-control login-attempt

Use password-control login-attempt to specify the maximum number of consecutive failed login
attempts and the action to be taken when a user fails to log in after the specified number of attempts.
Use undo password-control login-attempt to restore the default.
Syntax
password-control login-attempt login-times [ exceed { lock | lock-time time | unlock } ]
undo password-control login-attempt
Default
The maximum number of consecutive failed login attempts is 3 and a user failing to log in after the
specified number of attempts must wait for 1 minute before trying again.
Views
System view
Default command level
2: System level
Parameters
login-times: Specifies the maximum number of consecutive failed login attempts, in the range of 2 to
10.
exceed: Specifies the action to be taken when a user fails to log in after the specified number of
attempts.
lock: Permanently prohibits a user who fails to log in after the specified number of attempts from
logging in.
lock-time time: Forces a user who fails to log in after the specified number of attempts to wait for a
period of time before trying again. The time argument is in minutes and the value range is 1 to 360.
205