Crl Url - HPE FlexNetwork HSR6800 Security Command Reference

Default
The CRL update period depends on the next update field in the CRL file.
Views
PKI domain view
Default command level
2: System level
Parameters
hours: Specifies the CRL update period in hours, in the range of 1 to 720.
Examples
# Set the CRL update period to 20 hours.
<Sysname> system-view
[Sysname] pki domain 1
[Sysname-pki-domain-1] crl update-period 20

crl url

Use crl url to specify the URL of the CRL distribution point.
Use undo crl url to remove the configuration.
Syntax
crl url url-string
undo crl url
Default
No CRL distribution point URL is specified.
Views
PKI domain view
Default command level
2: System level
Parameters
url-string: Specifies the URL of the CRL distribution point, a case-insensitive string of 1 to 125
characters in the format of ldap://server_location or http://server_location, where server_location
must be an IP address or a domain name.
Usage guidelines
When the URL of the CRL distribution point is not set, you should acquire the CA certificate and a
local certificate, and then acquire a CRL through SCEP.
Examples
# Specify the URL of the CRL distribution point.
<Sysname> system-view
[Sysname] pki domain 1
[Sysname-pki-domain-1] crl url ldap://169.254.0.30
234