Qos Apply Policy (Interface View, Pw View) - HPE FlexNetwork HSR6800 series Command Reference Manual

Table 22 Command output
Field
global
local
Matched
Green packets
Yellow packets
Red packets
For the description of other fields, see

qos apply policy (interface view, PW view)

Use qos apply policy to apply a QoS policy to an interface or PW.
Use undo qos apply policy to remove an applied QoS policy.
Syntax
qos apply policy policy-name { inbound | outbound }
undo qos apply policy policy-name { inbound | outbound }
Default
No QoS policy is applied.
Views
Cross-connect PW view/VSI LDP PW view/VSI static PW view
Interface view
Predefined user roles
network-admin
Parameters
policy-name: Specifies a QoS policy by its name, a case-sensitive string of 1 to 31 characters.
inbound: Applies the QoS policy to the incoming traffic of an interface. This keyword is not
supported in PW view.
outbound: Applies the QoS policy to the outgoing traffic of an interface or PW.
Usage guidelines
When you apply a QoS policy to an interface or PW, follow these rules:
•
The bandwidth assigned to AF and EF queues in the QoS policy must be smaller than the
available bandwidth of the interface or PW. Otherwise, the QoS policy cannot be successfully
applied to the interface or PW.
•
If you modify the available bandwidth of the interface or PW to be smaller than the bandwidth for
AF and EF queues, the applied QoS policy is removed.
•
An inbound QoS policy cannot contain a GTS action or any of these queuing actions: queue ef,
queue af, or queue wfq.
Examples
# Apply QoS policy USER1 to the outgoing traffic of GigabitEthernet 2/1/1.
Description
Indicates a global user, who comes online from a global interface such as an
aggregate interface.
Indicates a local user, who comes online from a physical interface.
Number of packets that meet match criteria.
Statistics about green packets.
Statistics about yellow packets.
Statistics about red packets.
Table 15
68
and Table 17.