Accounting Login - HPE FlexNetwork HSR6800 Security Command Reference

Views
ISP domain view
Default command level
2: System level
Parameters
local: Performs local accounting.
none: Does not perform any accounting.
radius-scheme radius-scheme-name: Specifies a RADIUS scheme by its name, a case-insensitive
string of 1 to 32 characters.
Usage guidelines
This command is supported only on SAP interface modules that are operating in Layer 2 mode.
The specified RADIUS scheme must have been configured.
Examples
# Configure ISP domain test to use local accounting for LAN users.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] accounting lan-access local
# Configure ISP domain test to use RADIUS accounting scheme rd for LAN users and use local
accounting as the backup.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] accounting lan-access radius-scheme rd local
Related commands
•
local-user
•
accounting default
•
radius scheme

accounting login

Use accounting login to configure the accounting method for login users through the console, AUX,
or Asyn port or through Telnet.
Use undo accounting login to restore the default.
Syntax
accounting login { hwtacacs-scheme hwtacacs-scheme-name [ local ] | local | none |
radius-scheme radius-scheme-name [ local ] }
undo accounting login
Default
The default accounting method for the ISP domain is used for login users.
Views
ISP domain view
Default command level
2: System level
5