Firewall Ipv6 Default; Firewall Ipv6 Enable - HPE FlexNetwork HSR6800 Security Command Reference

Default
The IPv4 firewall function is disabled.
Views
System view
Default command level
2: System level
Parameters
all: Specifies all interface cards.
slot slot-number: Specifies the interface card in the specified slot. (In standalone mode.)
chassis chassis-number slot slot-number: Specifies an interface card in an IRF member device.
The chassis-number argument represents the IRF member ID of the device. The slot-number
argument represents the slot number of the card. (In IRF mode.)
Examples
# Enable the IPv4 firewall function.
<Sysname> system-view
[Sysname] firewall enable

firewall ipv6 default

Use firewall ipv6 default to specify the default firewall filtering action of the IPv6 firewall.
Syntax
firewall ipv6 default { deny | permit }
Default
The default filtering action of IPv6 firewall is permitting packets to pass (permit).
Views
System view
Default command level
2: System level
Parameters
deny: Specifies the filtering action as denying packets to pass the firewall.
permit: Specifies the filtering action as permitting packets to pass the firewall.
Examples
# Specify the default filtering action of the IPv6 firewall as denying packets to pass.
<Sysname> system-view
[Sysname] firewall ipv6 default deny

firewall ipv6 enable

Use firewall ipv6 enable to enable the IPv6 firewall function.
Use undo firewall ipv6 enable to disable the IPv6 firewall function.
Syntax
firewall ipv6 enable
365