HPE FlexNetwork HSR6800 Security Command Reference page 267

Syntax
display ipsec policy [ brief | name policy-name [ seq-number ] ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
brief: Displays brief information about all IPsec policies.
name: Displays detailed information about a specific IPsec policy or IPsec policy group.
policy-name: Specifies the name of an IPsec policy, a string of 1 to 15 characters.
seq-number: Specifies the sequence number of an IPsec policy, in the range of 1 to 65535.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If you do not specify any parameters, the command displays detailed information about all IPsec
policies.
If you specify the name policy-name option but leave the seq-number argument, the command
displays detailed information about the specified IPsec policy group.
Examples
# Display brief information about all IPsec policies.
<Sysname> display ipsec policy brief
IPsec Policy Name
------------------------------------------------------------------------
bbbbbbbbbbbbbbb-1
man-1
map-1
nat-1
test-1
toccccc-1
IPsec Policy Name
------------------------------------------------------------------------
man-1
Table 35 Command output
Field
IPsec Policy Name
Mode ACL IKE Peer Name
template
manual 3400
isakmp 3000 peer
isakmp 3500 nat
isakmp 3200 test
isakmp 3003 tocccc
Mode ACL Local Address
manual 3400 3.3.3.1
Description
Name and sequence number of the IPsec policy separated by hyphen.
254
Mapped Template
aaaaaaaaaaaaaaa
Remote Address
3.3.3.2