Display Portal Server - HPE FlexNetwork HSR6800 Security Command Reference

display portal server

Use display portal server to display information about a specific portal server or all portal servers.
Syntax
display portal server [ server-name ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
server-name: Name of a portal server, a case-sensitive string of 1 to 32 characters.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display information about portal server aaa.
<Sysname> display portal server aaa
Portal server:
1)aaa:
IP
VPN instance : vpn1
Port
Key
URL
Server Type
Status
Table 16 Command output
Field
1)
aaa
VPN instance
IP
Port
Key
URL
: 192.168.0.111
: 50100
: ******
: http://192.168.0.111
: IMC
: Up
Description
Number of the portal server.
Name of the portal server.
MPLS L3VPN to which the portal server belongs.
IP address of the portal server.
Listening port on the portal server.
Shared key for exchanges between the access device and portal server.
•
****** is displayed if a key is configured.
•
Not configured is displayed if no key is configured.
Address the packets are to be redirected to.
Not configured is displayed if no address is configured.
149