Display Ssh Client Source - HPE FlexNetwork HSR6800 Security Command Reference

include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If neither source IP address nor source interface is specified for the SFTP client, the system displays
the message "Neither source IP address nor source interface was specified for the SFTP client."
Examples
# Display the source IP address configured for the SFTP client.
<Sysname> display sftp client source
The source IP address you specified is 192.168.0.1
Related commands
sftp client source

display ssh client source

Use display ssh client source to display the source IP address or source interface configured for
the Stelnet client.
Syntax
display ssh client source [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If neither source IP address nor source interface is specified for the Stelnet client, the system
displays the message "Neither source IP address nor source interface was specified for the Stelnet
client."
Examples
# Display the source IP address or source interface configured for the Stelnet client.
<Sysname> display ssh client source
The source IP address you specified is 192.168.0.1
Related commands
ssh client source
341