Password-Control Enable; Password-Control Expired-User-Login - HPE FlexNetwork HSR6800 Security Command Reference
Hide thumbs
Also See for FlexNetwork HSR6800:
- Configuration manual (503 pages) ,
- Command reference manual (153 pages) ,
- Product end-of-life disassembly instructions (2 pages)
Table of Contents
Advertisement
password-control enable
Use password-control enable to enable the password control feature globally.
Use undo password-control enable to disable the password control feature globally.
Syntax
password-control enable
undo password-control enable
Default
The password control feature is disabled globally.
Views
System view
Default command level
2: System level
Usage guidelines
The password control functions take effect only after the password control feature is enabled
globally.
Examples
# Enable the password control feature globally.
<Sysname> system-view
[Sysname] password-control enable
Related commands
display password-control
password-control expired-user-login
Use password-control expired-user-login to set the maximum number of days and maximum
number of times that a user can log in after the password expires.
Use undo password-control expired-user-login to restore the defaults.
Syntax
password-control expired-user-login delay delay times times
undo password-control expired-user-login
Default
A user can log in three times within 30 days after the password expires.
Views
System view
Default command level
2: System level
Parameters
delay: Specifies the maximum number of days during which a user can log in using an expired
password. It must be in the range of 1 to 90.
202
Advertisement
Table of Contents
