HPE FlexNetwork HSR6800 Security Command Reference page 272
Hide thumbs
Also See for FlexNetwork HSR6800:
- Configuration manual (503 pages) ,
- Command reference manual (153 pages) ,
- Product end-of-life disassembly instructions (2 pages)
Table of Contents
Advertisement
<Sysname> display ipsec policy-template brief
Policy-template-Name
------------------------------------------------------
test-tplt300
Table 37 Command output
Field
Policy-template-Name
acl
Remote Address
# Display detailed information about all IPsec policy templates.
<Sysname> display ipsec policy-template
===============================================
IPsec Policy Template Group: "test"
===============================================
---------------------------------
Policy template name: "test"
sequence number: 1
---------------------------------
encapsulation mode: tunnel
security data flow :
ACL's Version:
ike-peer name:
PFS: N
transform-set name:
IPsec sa local duration(time based): 3600 seconds
IPsec sa local duration(traffic based): 1843200 kilobytes
Table 38 Command output
Field
encapsulation mode
security data flow
ACL's Version
ike-peer name
PFS
DH group
transport-set name
acl
2200
Description
Name and sequence number of the IPsec policy template separated by
hyphen.
ACL referenced by the IPsec policy template.
Remote IP address.
acl4
per
testprop
Description
IPsec packet encapsulation mode:
•
tunnel—Tunnel mode.
•
transport—Transport mode.
ACL referenced by the IPsec policy template.
ACL version:
•
acl4—IPv4 ACL.
•
acl6—IPv6 ACL.
IKE peer referenced by the IPsec policy template.
Whether perfect forward secrecy is enabled.
Used DH group. Its value can be 1, 2, 5, or 14.
IPsec transform set referenced by the IPsec policy template.
259
Remote-Address
Advertisement
Table of Contents
