Primary Accounting (Radius Scheme View) - HPE FlexNetwork HSR6800 Security Command Reference

A RADIUS scheme can have only one source IP address for outgoing RADIUS packets. If you
specify a new source IP address for the same RADIUS scheme, the new one overwrites the old one.
The setting configured by the nas-ip command in RADIUS scheme view is only for the RADIUS
scheme, whereas that configured by the radius nas-ip command in system view is for all RADIUS
schemes. The setting in RADIUS scheme view takes precedence.
Examples
# Set the source IP address for outgoing RADIUS packets to 10.1.1.1.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] nas-ip 10.1.1.1
Related commands
radius nas-ip

primary accounting (RADIUS scheme view)

Use primary accounting to specify the primary RADIUS accounting server.
Use undo primary accounting to remove the configuration.
Syntax
primary accounting { ipv4-address | ipv6 ipv6-address } [ port-number | key [ cipher | simple ] key
| vpn-instance vpn-instance-name ] *
undo primary accounting
Default
No primary RADIUS accounting server is specified.
Views
RADIUS scheme view
Default command level
2: System level
Parameters
ipv4-address: Specifies the IPv4 address of the primary RADIUS accounting server.
ipv6 ipv6-address: Specifies the IPv6 address of the primary RADIUS accounting server, which must
be a valid global unicast address.
port-number: Specifies the service port number of the primary RADIUS accounting server, which is a
UDP port number ranging from 1 to 65535 and defaults to 1813.
key [ cipher | simple ] key: Specifies the shared key for secure communication with the primary
RADIUS accounting server. In FIPS mode, the shared key must be a string of at least 8 characters
that contain numbers, uppercase letters, lowercase letters, and special characters, and is encrypted
and decrypted by using 3DES.
•
cipher key: Specifies a ciphertext shared key, which is a case-sensitive ciphertext string of 1 to
117 characters.
•
simple key: Specifies a plaintext shared key, which is a case-sensitive string of 1 to 64
characters.
•
If neither cipher nor simple is specified, you set a plaintext shared key string.
vpn-instance vpn-instance-name: Specifies the MPLS L3VPN to which the primary RADIUS
accounting server belongs. The vpn-instance-name argument is a case-sensitive string of 1 to 31
characters. If the server is on the public network, do not specify this option.
62