Arp Detection Enable; Arp Detection Trust - HPE FlexNetwork HSR6800 Security Command Reference

Examples
# Configure a user validity check rule, and enable user validity check.
<Sysname> system-view
[Sysname] arp detection 0 permit ip 10.1.1.1 255.255.0.0 mac 0001-0203-0607 ffff-ffff-0000
[Sysname] vlan 2
[Sysname-vlan2] arp detection enable
Related commands

arp detection enable

arp detection enable
Use arp detection enable to enable ARP detection.
Use undo arp detection enable to restore the default.
Syntax
arp detection enable
undo arp detection enable
Default
ARP detection is disabled.
Views
VLAN view
Default command level
2: System level
Examples
# Enable ARP detection for VLAN 2.
<Sysname> system-view
[Sysname] vlan 2
[Sysname-Vlan2] arp detection enable

arp detection trust

Use arp detection trust to configure the port as an ARP trusted port.
Use undo arp detection trust to restore the default.
Syntax
arp detection trust
undo arp detection trust
Default
The port is an ARP untrusted port.
Views
Layer 2 Ethernet interface view
Default command level
2: System level
463