Radius Configuration Commands; Accounting-On Enable - HPE FlexNetwork HSR6800 Security Command Reference

[Sysname] local-user abc
[Sysname-luser-abc] validity-date 12:10:20-2008/04/30
[Sysname-luser-abc] expiration-date 12:10:20-2008/05/31
Related commands
expiration-date

RADIUS configuration commands

accounting-on enable

Use accounting-on enable to configure the accounting-on feature.
Use undo accounting-on enable to disable the accounting-on feature.
Syntax
accounting-on enable [ interval seconds | send send-times ] *
undo accounting-on enable
Default
The accounting-on feature is disabled.
Views
RADIUS scheme view
Default command level
2: System level
Parameters
seconds: Time interval for retransmitting an accounting-on packet in seconds, ranging from 1 to 15.
The default is 3 seconds.
send-times: Maximum number of accounting-on packet transmission attempts, ranging from 1 to 255.
The default is 50.
Usage guidelines
The accounting-on feature enables the device, after rebooting, to automatically send an
accounting-on message to the RADIUS accounting server indicated by the RADIUS scheme to stop
accounting for and log out online users.
Parameters set with the accounting-on enable command take effect immediately.
After executing the accounting-on enable command, issue the save command to make sure that
the command takes effect after the device reboots.
Examples
# Enable the accounting-on feature for RADIUS authentication scheme radius1, and set the
retransmission interval to 5 seconds and the transmission attempts to 15.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] accounting-on enable interval 5 send 15
Related commands
radius scheme
50