Tcp Attack Protection Configuration Commands; Display Tcp Status - HPE FlexNetwork HSR6800 Security Command Reference

TCP attack protection configuration
commands

display tcp status

Use display tcp status to display status of all TCP connections for monitoring TCP connections.
Syntax
display tcp status [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# In standalone mode, display status of all TCP connections.
<Sysname> display tcp status
*: TCP MD5 Connection
TCPCB
03e37dc4
04217174
# In IRF mode, display status of all TCP connections.
<Sysname> display tcp status
*: TCP MD5 Connection
TCPCB
09854ed0
09887e30
098886b0
0985f250
099e2440
099e3320
Chassis 2 Slot 0:
098c40f0
098c4db0
Chassis 2 Slot 1:
Local Add:port
0.0.0.0:4001
100.0.0.204:23
Local Add:port
0.0.0.0:23
0.0.0.0:179
0.0.0.0:179
0.0.0.0:646
10.0.0.2:1121
10.0.0.2:4646
0.0.0.0:23
0.0.0.0:646
Foreign Add:port
0.0.0.0:0
100.0.0.253:65508
Foreign Add:port
0.0.0.0:0
10.0.0.1:0
10.0.0.3:0
0.0.0.0:0
10.0.0.3:179
10.0.0.1:179
0.0.0.0:0
0.0.0.0:0
448
State
Listening
Established
State
Listening
Established
Listening
Listening
Syn_Sent
Syn_Sent
Listening
Listening