Dot1X Max-User - HPE FlexNetwork HSR6800 Security Command Reference

Total 1 connection(s) matched.
Related commands
display dot1x

dot1x max-user

Use dot1x max-user to set the maximum number of concurrent 802.1X users on a port.
Use undo dot1x max-user to restore the default.
Syntax
In system view:
dot1x max-user user-number [ interface interface-list ]
undo dot1x max-user [ interface interface-list ]
In Ethernet interface view:
dot1x max-user user-number
undo dot1x max-user
Default
The port supports a maximum of 1024 concurrent 802.1X users.
Views
System view, Ethernet interface view
Default command level
2: System level
Parameters
user-number: Specifies the maximum number of concurrent 802.1X users on a port. The value range
is 1 to 1024.
interface interface-list: Specifies an Ethernet port list, which can contain multiple Ethernet ports. The
interface-list argument is in the format of interface-list = { interface-type interface-number [ to
interface-type interface-number ] } & <1-10>, where interface-type represents the port type,
interface-number represents the port number, and & <1-10> means that you can provide up to 10
ports or port ranges. The start port number must be smaller than the end number and the two ports
must be of the same type.
Usage guidelines
In system view:
•
If you do not specify the interface-list argument, the command applies to all ports.
•
If you specify the interface-list argument, the command applies to the specified ports.
In Ethernet port view, the interface interface-list option is not available and the command applies to
only the Ethernet port.
Examples
# Set the maximum number of concurrent 802.1X users on port GigabitEthernet 3/0/1 to 32.
<Sysname> system-view
[Sysname] dot1x max-user 32 interface gigabitethernet 3/0/1
Or
<Sysname> system-view
[Sysname] interface gigabitethernet 3/0/1
119