Password - HPE FlexNetwork HSR6800 Security Command Reference

Parameters
user-name name: Specifies a user by the name, a string of 1 to 80 characters.
ip ipv4-address: Specifies the IPv4 address of a user.
ipv6 ipv6-address: Specifies the IPv6 address of a user.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
With no arguments provided, this command displays information about all users in the password
control blacklist.
Examples
# Display information about users in the password control blacklist.
<Sysname> display password-control blacklist
Username: test
IP: 192.168.44.1
Total 1 blacklist item(s) matched. 1 listed.
Table 25 Command output
Field
Username
IP
Login failed times
Lock flag

password

Use password to set a password for a local user in interactive mode.
Use undo password to remove the password for a local user.
Syntax
password
undo password
Views
Local user view
Default command level
2: System level
Login failed times: 1
Description
Username of the user.
IP address of the user.
Number of login failures.
Whether the user is prohibited from logging in:
•
unlock—Not prohibited.
•
lock—Prohibited temporarily or permanently, depending on the
password-control login-attempt command.
195
Lock flag: unlock