Certificate Request From; Certificate Request Mode - HPE FlexNetwork HSR6800 Security Command Reference
Hide thumbs
Also See for FlexNetwork HSR6800:
- Configuration manual (503 pages) ,
- Command reference manual (153 pages) ,
- Product end-of-life disassembly instructions (2 pages)
Table of Contents
Advertisement
Default
No entity is specified for certificate request.
Views
PKI domain view
Default command level
2: System level
Parameters
entity-name: Specifies an entity name for certificate request, a case-insensitive string of 1 to 15
characters.
Examples
# Specify the entity for certificate request as entity1.
<Sysname> system-view
[Sysname] pki domain 1
[Sysname-pki-domain-1] certificate request entity entity1
Related commands
pki entity
certificate request from
Use certificate request from to specify the authority for certificate request.
Use undo certificate request from to remove the configuration.
Syntax
certificate request from { ca | ra }
undo certificate request from
Default
No authority is specified for certificate request.
Views
PKI domain view
Default command level
2: System level
Parameters
ca: Indicates that the entity requests a certificate from a CA.
ra: Indicates that the entity requests a certificate from an RA.
Examples
# Specify that the entity requests a certificate from the CA.
<Sysname> system-view
[Sysname] pki domain 1
[Sysname-pki-domain-1] certificate request from ca
certificate request mode
Use certificate request mode to set the certificate request mode.
229
Advertisement
Table of Contents
