Authentication Login - HPE FlexNetwork HSR6800 Security Command Reference

Default command level
2: System level
Parameters
local: Performs local authentication.
none: Does not perform any authentication.
radius-scheme radius-scheme-name: Specifies a RADIUS scheme by its name, a case-insensitive
string of 1 to 32 characters.
Usage guidelines
This command is supported only on SAP interface modules that are operating in Layer 2 mode.
The specified RADIUS scheme must have been configured.
Examples
# Configure ISP domain test to use local authentication for LAN users.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] authentication lan-access local
# Configure ISP domain test to use RADIUS authentication scheme rd for LAN users and use local
authentication as the backup.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] authentication lan-access radius-scheme rd local
Related commands
•
local-user
•
authentication default
•
radius scheme

authentication login

Use authentication login to configure the authentication method for login users through the console,
AUX, or Asyn port, Telnet, or FTP.
Use undo authentication login to restore the default.
Syntax
authentication login { hwtacacs-scheme hwtacacs-scheme-name [ local ] | local | none |
radius-scheme radius-scheme-name [ local ] }
undo authentication login
Default
The default authentication method for the ISP domain is used for login users.
Views
ISP domain view
Default command level
2: System level
11