State (Isp Domain View); Local User Configuration Commands; Access-Limit - HPE FlexNetwork HSR6800 Security Command Reference

[Sysname] domain test
[Sysname-isp-test] session-time include-idle-time
Related commands
idle-cut enable

state (ISP domain view)

Use state to set the status of an ISP domain.
Use undo state to restore the default.
Syntax
state { active | block }
undo state
Default
An ISP domain is in active state.
Views
ISP domain view
Default command level
2: System level
Parameters
active: Places the ISP domain in active state to allow the users in the ISP domain to request network
services.
block: Places the ISP domain in blocked state to prevent users in the ISP domain from requesting
network services.
Usage guidelines
By blocking an ISP domain, you disable offline users of the domain from requesting network services.
The online users are not affected.
Examples
# Place the ISP domain test to the blocked state.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] state block

Local user configuration commands

access-limit

Use access-limit to limit the number of concurrent users of the same local user account.
Use undo access-limit to remove the limitation.
Syntax
access-limit max-user-number
undo access-limit
35