Group; Identity - HPE FlexNetwork HSR6800 Security Command Reference

The device supports 64 GDOI GM groups at most.
Examples
# Create a GDOI GM group named abc, and enter its view.
<Sysname> system-view
[Sysname] gdoi gm group abc
[Sysname-gdoi-gm-group-abc]
Related commands
display gdoi gm

group

Use group to specify the GDOI GM group to be referenced by the GDOI IPsec policy.
Use undo group to remove the GDOI GM group referenced by the GDOI IPsec policy.
Syntax
group group-name
undo group
Default
A GDOI IPsec policy does not reference any GDOI GM group.
Views
GDOI IPsec policy entry view
Default command level
2: System level
Parameters
group-name: Specifies the name of a GDOI GM group, a case-sensitive string of 1 to 63 characters.
The group must have existed.
Usage guidelines
A GDOI IPsec policy can reference only one GDOI GM group. If you configure this command for
multiple times, the last configuration takes effect.
GDOI IPsec policy entries of different GDOI IPsec policies can reference the same GDOI GM group,
but those of the same GDOI IPsec policy cannot.
Examples
# Configure a GDOI IPsec policy entry and enter its view. The IPsec policy name is map and the
entry sequence number is 1.
<Sysname> system-view
[Sysname] ipsec policy map 1 gdoi
# Reference GDOI GM group abc for the GDOI IPsec policy entry.
[Sysname-ipsec-policy-gdoi-map-1] group abc
Related commands
gdoi gm group

identity

Use identity to configure an ID for the GDOI GM group.
512