Retry Stop-Accounting (Radius Scheme View); Secondary Accounting (Radius Scheme View) - HPE FlexNetwork HSR6800 Security Command Reference

retry stop-accounting (RADIUS scheme view)

Use retry stop-accounting to set the maximum number of stop-accounting request transmission
attempts.
Use undo retry stop-accounting to restore the default.
Syntax
retry stop-accounting retry-times
undo retry stop-accounting
Default
The maximum number of stop-accounting request transmission attempts is 500.
Views
RADIUS scheme view
Default command level
2: System level
Parameters
retry-times: Maximum number of stop-accounting request transmission attempts, ranging from 10 to
65535.
Usage guidelines
The maximum number of stop-accounting request transmission attempts, together with some other
parameters, controls how the NAS deals with stop-accounting request packets.
Suppose that the RADIUS server response timeout period is 3 seconds (set with the timer
response-timeout command), the maximum number of transmission attempts is five (set with the
retry command), and the maximum number of stop-accounting request transmission attempts is 20
(set with the retry stop-accounting command). For each stop-accounting request, if the device
receives no response within 3 seconds, it retransmits the request. If it receives no responses after
retransmitting the request five times, it considers the attempt a failure, buffers the request, and
makes another attempt. If 20 consecutive attempts fail, the device discards the request.
Examples
# Set the maximum number of stop-accounting request transmission attempts to 1000 for RADIUS
scheme radius1.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] retry stop-accounting 1000
Related commands
•
retry
•
retry stop-accounting
•
timer response-timeout
•
display stop-accounting-buffer

secondary accounting (RADIUS scheme view)

Use secondary accounting to specify a secondary RADIUS accounting server.
Use undo secondary accounting to remove the configuration.
72