HPE FlexNetwork HSR6800 Security Command Reference page 445

Examples
# Display configuration information about attack protection policy 1.
<Sysname> display attack-defense policy 1
Attack-defense Policy Information
------------------------------------------------------------
Policy number
Bound interfaces
------------------------------------------------------------
Smurf attack-defense
ICMP redirect attack-defense
ICMP unreachable attack-defense
Large ICMP attack-defense
Max-length
TCP flag attack-defense
Tracert attack-defense
Fraggle attack-defense
WinNuke attack-defense
LAND attack-defense
Source route attack-defense
Route record attack-defense
Scan attack-defense
Add to blacklist
Blacklist timeout
Max-rate
Signature-detect action
--------------------------------------------------------------------------
ICMP flood attack-defense
ICMP flood action
ICMP flood high-rate
ICMP flood low-rate
ICMP flood attack-defense for specific IP addresses:
IP
192.168.1.1
192.168.2.1
--------------------------------------------------------------------------
UDP flood attack-defense
UDP flood action
UDP flood high-rate
UDP flood low-rate
UDP Flood attack-defense for specific IP addresses:
IP
192.168.1.1
192.168.2.1
--------------------------------------------------------------------------
SYN flood attack-defense
SYN flood action
SYN flood high-rate
SYN flood low-rate
: 1
: GigabitEthernet3/0/1
: Enabled
: Disabled
: Disabled
: Enabled
: 250 bytes
: Enabled
: Enabled
: Enabled
: Enabled
: Enabled
: Enabled
: Enabled
: Enabled
: Enabled
: 10 minutes
: 1000 connections/s
: Drop-packet
: Enabled
: Syslog
: 2000 packets/s
: 750 packets/s
High-rate(packets/s)
1000
2000
: Enabled
: Drop-packet
: 2000 packets/s
: 750 packets/s
High-rate(packets/s)
1000
2000
: Enabled
: Drop-packet
: 2000 packets/s
: 750 packets/s
432
Low-rate(packets/s)
500
1000
Low-rate(packets/s)
500
500