Reset Arp Detection Statistics - HPE FlexNetwork HSR6800 Security Command Reference

Syntax
display arp detection statistics [ interface interface-type interface-number ] [ | { begin | exclude |
include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
interface interface-type interface-number: Displays the ARP detection statistics of a specific
interface.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display the ARP detection statistics of all interfaces.
<Sysname> display arp detection statistics
State: U-Untrusted
ARP packets dropped by ARP inspect checking:
Interface(State)
GE3/0/1(U)
GE3/0/2(U)
GE3/0/3(T)
GE3/0/4(U)
Table 82 Command output
Field
Interface(State)
IP
Src-MAC
Dst-MAC
Inspect

reset arp detection statistics

Use reset arp detection statistics to clear ARP detection statistics of a specific interface. If you do
not specify any interface, this command clears the statistics of all interfaces.
T-Trusted
IP Src-MAC
40 0
0 0
0 0
0 0
Description
State T or U identifies a trusted or untrusted port.
Number of ARP packets discarded due to invalid source and
destination IP addresses.
Number of ARP packets discarded due to invalid source MAC
address.
Number of ARP packets discarded due to invalid destination
MAC address.
Number of ARP packets that failed to pass ARP detection
(based on static IP Source Guard binding entries/DHCP
snooping entries/802.1X security entries/OUI MAC addresses).
466
Dst-MAC Inspect
0 78
0 0
0 0
30 0