Hwtacacs Nas-Ip - HPE FlexNetwork HSR6800 Security Command Reference

Default command level
2: System level
Parameters
hwtacacs-scheme hwtacacs-scheme-name: Specifies buffered stop-accounting requests that are
destined for the accounting server defined in an HWTACACS scheme. The HWTACACS scheme
name is a case-insensitive string of 1 to 32 characters.
slot slot-number: Specifies a card by its slot number. The slot-number argument represents the slot
number of the card. (In standalone mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The
chassis-number argument represents the member ID of the IRF member device, and the
slot-number argument represents the slot number of the card. (In IRF mode.)
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display information about the stop-accounting requests buffered for HWTACACS scheme hwt1 on
the card in slot 0. (In standalone mode.)
<Sysname> display stop-accounting-buffer hwtacacs-scheme hwt1 slot 0
Slot 0:
Total 0 record(s) Matched
# Display information about the stop-accounting requests buffered for HWTACACS scheme hwt1 on
slot 0 of IRF member 1. (In IRF mode.)
<Sysname> display stop-accounting-buffer hwtacacs-scheme hwt1 chassis 1 slot 0
Slot 0 in chassis
Total 0 record(s) Matched
Related commands
•
reset stop-accounting-buffer
•
stop-accounting-buffer enable
•
retry stop-accounting

hwtacacs nas-ip

Use hwtacacs nas-ip to specify a source IP address for outgoing HWTACACS packets.
Use undo hwtacacs nas-ip to remove the configuration.
Syntax
hwtacacs nas-ip ip-address [ vpn-instance vpn-instance-name ]
undo hwtacacs nas-ip ip-address [ vpn-instance vpn-instance-name ]
Default
The source IP address of a packet sent to the server is the IP address of the outbound interface.
1:
89