Ipsec Policy-Template; Ipsec Profile (System View) - HPE FlexNetwork HSR6800 Security Command Reference

Examples
# Create an IPsec policy with the name policy2 and sequence number 200 by referencing IPsec
policy template temp1.
<Sysname> system-view
[Sysname] ipsec policy policy2 200 isakmp template temp1

ipsec policy-template

Use ipsec policy-template to create an IPsec policy template and enter the IPsec policy template
view.
Use undo ipsec policy-template to delete the specified IPsec policy templates.
Syntax
ipsec policy-template template-name seq-number
undo ipsec policy-template template-name [ seq-number ]
Default
No IPsec policy template exists.
Views
System view
Default command level
2: System level
Parameters
template-name: Specifies the name for the IPsec policy template, a case-insensitive string of 1 to 41
characters. No minus sign (-) can be included.
seq-number: Specifies the sequence number for the IPsec policy template, in the range of 1 to
65535.
Usage guidelines
Using the undo command without the seq-number argument deletes an IPsec policy template
group.
In an IPsec policy template group, an IPsec policy template with a smaller sequence number has a
higher priority.
Examples
# Create an IPsec policy template with the name template1 and the sequence number 100.
<Sysname> system-view
[Sysname] ipsec policy-template template1 100
[Sysname-ipsec-policy-template-template1-100]
Related commands
display ipsec policy template

ipsec profile (system view)

Use ipsec profile to create an IPsec profile and enter its view. An IPsec profile defines the IPsec
transform sets to be used to protect the data and the IKE negotiation parameters used to set up the
SAs.
Use undo ipsec profile to delete an IPsec profile.
280