Identity Number - HPE FlexNetwork HSR6800 Security Command Reference
Hide thumbs
Also See for FlexNetwork HSR6800:
- Configuration manual (503 pages) ,
- Command reference manual (153 pages) ,
- Product end-of-life disassembly instructions (2 pages)
Table of Contents
Advertisement
Syntax
identity address address
undo identity
Default
No IP address is configured for a GDOI KS group.
Views
GDOI KS group view
Default command level
2: System level
Parameters
address: Specifies any valid IPv4 address to identify the GDOI KS group.
Usage guidelines
You can configure only one type of ID (either an IP address or a number) for a GDOI KS group. A
GDOI KS group uses the IP address or the number, whichever is configured later.
Examples
# Configure the IP address of the GDOI KS group abc as 202.202.202.10.
<Sysname> system-view
[Sysname]gdoi ks group abc
[Sysname-gdoi-ks-group-abc] identity address 202.202.202.10
Related commands
•
identity number
•
gdoi ks group
identity number
Use identity number to configure a number for the GDOI KS group.
Use undo identity to delete the GDOI KS group number.
Syntax
identity number number
undo identity
Default
No number is configured for a GDOI KS group number.
Views
GDOI KS group view
Default command level
2: System level
Parameters
number: Specifies a number in the range of 0 to 2147483647 to identify the GDOI KS group.
Usage guidelines
You can configure only one type of ID (either an IP address or a number) for a GDOI KS group. A
GDOI KS group uses the IP address or the number, whichever is configured later.
487
Advertisement
Table of Contents
