Display Firewall Http Url-Filter Parameter - HPE FlexNetwork HSR6800 Security Command Reference

begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If you do not specify any parameters, the command displays brief information about URL address
filtering.
Examples
# Display brief information about URL address filtering.
<Sysname> display firewall http url-filter host
URL-filter host is enabled.
Default method: permit.
# Display URL address filtering information for a specific filtering entry.
<Sysname> display firewall http url-filter host item ^webfilter$
The HTTP request packet including "^webfilter$" had been matched for 10 times.
# Display URL address filtering information for all filtering entries.
<Sysname> display firewall http url-filter host all
SN Match-Times
----------------------------------------------
1 10
Table 68 Command output
Field
SN
Match-Times
Keywords
# Display detailed information about URL address filtering.
<Sysname> display firewall http url-filter host verbose
URL-filter host is enabled.
Default method: permit.
The support for IP address: deny.
No ACL group has been configured.
There are 10 packet(s) being filtered.
There are 0 packet(s) being passed.
Table 69 Command output
Field
Default method
The support for IP address

display firewall http url-filter parameter

Use display firewall http url-filter parameter to display information about URL parameter filtering.
Keywords
^webfilter$
Description
Serial number.
Number of times that the keyword has been matched.
URL address filtering keyword.
Description
Default URL address filtering action, permit or deny.
Support for website IP addresses, permit or deny.
402