Qos Pre-Classify - HPE FlexNetwork HSR6800 Security Command Reference
Hide thumbs
Also See for FlexNetwork HSR6800:
- Configuration manual (503 pages) ,
- Command reference manual (153 pages) ,
- Product end-of-life disassembly instructions (2 pages)
Table of Contents
Advertisement
Default command level
2: System level
Usage guidelines
The command is not applicable to manual IPsec policies.
If the IPsec policy is not enabled for the IKE peer, the peer cannot take part in the IKE negotiation.
Examples
# Enable the IPsec policy with the name policy1 and sequence number 100.
<Sysname> system-view
[Sysname] ipsec policy policy1 100 isakmp
[Sysname-ipsec-policy-isakmp-policy1-100] policy enable
Related commands
•
ipsec policy (system view)
•
ipsec policy-template
qos pre-classify
Use qos pre-classify to enable packet information pre-extraction.
Use undo qos pre-classify to restore the default.
Syntax
qos pre-classify
undo qos pre-classify
Default
Packet information pre-extraction is disabled.
Views
IPsec policy view, IPsec policy template view
Default command level
2: System level
Usage guidelines
With the packet information pre-extraction feature enabled, QoS classifies a packet based on the
header of the original IP packet—the header of the IP packet that has not been encapsulated by
IPsec.
Examples
# Enable packet information pre-extraction.
<Sysname> system-view
[Sysname] ipsec policy policy1 100 manual
[Sysname-ipsec-policy-manual-policy1-100] qos pre-classify
Related commands
•
ipsec policy (system view)
•
ipsec policy-template
285
Advertisement
Table of Contents
