Signature-Detect Action Drop-Packet - HPE FlexNetwork HSR6800 Security Command Reference

Parameters
fraggle: Specifies the Fraggle packet attack.
icmp-redirect: Specifies the ICMP redirect packet attack.
icmp-unreachable: Specifies the ICMP unreachable packet attack.
land: Specifies the Land packet attack.
large-icmp: Specifies the large ICMP packet attack.
route-record: Specifies the route record packet attack.
smurf: Specifies the Smurf packet attack.
source-route: Specifies the source route packet attack.
tcp-flag: Specifies the TCP flag packet attack.
tracert: Specifies the Tracert packet attack.
winnuke: Specifies the Winnuke packet attack.
Examples
# Enable signature detection of Fraggle attack in attack protection policy 1.
<Sysname> system-view
[Sysname] attack-defense policy 1
[Sysname-attack-defense-policy-1] signature-detect fraggle enable
Related commands
display attack-defense policy

signature-detect action drop-packet

Use signature-detect action drop-packet to configure the device to drop single-packet attack
packets.
Use undo signature-detect action to restore the default.
Syntax
signature-detect action drop-packet
undo signature-detect action
Default
The device does not process the attack packets if it detects a single-packet attack.
Views
Attack protection policy view
Default command level
2: System level
Examples
# Configure attack protection policy 1 to drop single-packet attack packets.
<Sysname> system-view
[Sysname] attack-defense policy 1
[Sysname-attack-defense-policy-1] signature-detect action drop-packet
Related commands
display attack-defense policy
444