Timer Realtime-Accounting (Hwtacacs Scheme View) - HPE FlexNetwork HSR6800 Security Command Reference

Default
The primary server quiet period is 5 minutes.
Views
HWTACACS scheme view
Default command level
2: System level
Parameters
minutes: Primary server quiet period. The value ranges from 1 to 255, in minutes.
Usage guidelines
When the primary server is found unreachable, the device changes the status of the server from
active to blocked and keeps the server in blocked state until the quiet timer expires.
Examples
# Set the quiet timer for the primary server to 10 minutes.
<Sysname> system-view
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] timer quiet 10
Related commands
display hwtacacs

timer realtime-accounting (HWTACACS scheme view)

Use timer realtime-accounting to set the real-time accounting interval.
Use undo timer realtime-accounting to restore the default.
Syntax
timer realtime-accounting minutes
undo timer realtime-accounting
Default
The real-time accounting interval is 12 minutes.
Views
HWTACACS scheme view
Default command level
2: System level
Parameters
minutes: Real-time accounting interval in minutes. The value can be 0 or a multiple of 3, ranging from
3 to 60. A value of 0 means "Do not send online user accounting information to the HWTACACS
server."
Usage guidelines
For real-time accounting, a NAS must transmit the accounting information of online users to the
HWTACACS accounting server periodically. This command is for setting the interval.
Consider the performance of the NAS and the HWTACACS server when you set the real-time
accounting interval. A shorter interval requires higher performance. Use a longer interval when there
are a large number of users (more than 1000, inclusive).
102