Session Aging-Time - HPE FlexNetwork HSR6800 Security Command Reference

Hide thumbs Also See for FlexNetwork HSR6800:
Table of Contents

Advertisement

<Sysname> reset session statistics

session aging-time

Use session aging-time to set the aging timer for sessions of a specified protocol that are in a
specified state.
Use undo session aging-time to restore the default. If no keyword is specified, the command
restores the session aging timers for all protocol states to the defaults.
Syntax
session aging-time { accelerate | fin | icmp-closed | icmp-open | rawip-open | rawip-ready | syn
| tcp-est | udp-open | udp-ready } time-value
undo session aging-time [ accelerate | fin | icmp-closed | icmp-open | rawip-open |
rawip-ready | syn | tcp-est | udp-open | udp-ready ]
Default
The defaults vary with device models.
Views
System view
Default command level
2: System level
Parameters
accelerate: Specifies the aging timer for the sessions in the accelerate queue.
fin: Specifies the aging timer for the TCP sessions in the FIN_WAIT state.
icmp-closed: Specifies the aging timer for the ICMP sessions in the CLOSED state.
icmp-open: Specifies the aging timer for the ICMP sessions in the OPEN state.
rawip-open: Specifies the aging timer for the sessions in the RAWIP_OPEN state.
rawip-ready: Specifies the aging timer for the sessions in the RAWIP_READY state.
syn: Specifies the aging timer for the TCP sessions in the SYN_SENT or SYN_RCV state.
tcp-est: Specifies the aging timer for the TCP sessions in the ESTABLISHED state.
udp-open: Specifies the aging timer for the UDP sessions in the OPEN state.
udp-ready: Specifies the aging timer for the UDP sessions in the READY state.
time-value: Aging time in seconds, in the range of 5 to 100000.
Usage guidelines
If no keyword is specified, the command restores the session aging times for all protocol states to the
defaults.
The defaults as follows:
ACCELERATE state: 10 seconds.
TCP FIN_WAIT state: 30 seconds.
ICMP CLOSED state: 30 seconds.
ICMP OPEN state: 60 seconds.
RAWIP_OPEN state: 30 second.
RAWIP_READY state: 60 seconds.
TCP SYN_SENT and SYN_RCV state: 30 seconds.
388

Advertisement

Table of Contents
loading

Table of Contents