Authentication Super - HPE FlexNetwork HSR6800 Security Command Reference
Hide thumbs
Also See for FlexNetwork HSR6800:
- Configuration manual (503 pages) ,
- Command reference manual (153 pages) ,
- Product end-of-life disassembly instructions (2 pages)
Table of Contents
Advertisement
Examples
# Configure ISP domain test to use local authentication for PPP users.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] authentication ppp local
# Configure ISP domain test to use RADIUS authentication scheme rd for PPP users and use local
authentication as the backup.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] authentication ppp radius-scheme rd local
Related commands
•
local-user
•
authentication default
•
hwtacacs scheme
•
radius scheme
authentication super
Use authentication super to configure the authentication method for user privilege level switching.
Use undo authentication super to restore the default.
Syntax
authentication
radius-scheme-name }
undo authentication super
Default
The default authentication method for the ISP domain is used for user privilege level switching
authentication.
Views
ISP domain view
Default command level
2: System level
Parameters
hwtacacs-scheme hwtacacs-scheme-name: Specifies an HWTACACS scheme by its name, a
case-insensitive string of 1 to 32 characters.
radius-scheme radius-scheme-name: Specifies a RADIUS scheme by its name, a case-insensitive
string of 1 to 32 characters.
Usage guidelines
The specified RADIUS or HWTACACS authentication scheme must have been configured.
Examples
# Configure ISP domain test to use HWTACACS scheme tac for user privilege level switching
authentication.
<Sysname> system-view
[Sysname] super authentication-mode scheme
super
{
hwtacacs-scheme
hwtacacs-scheme-name
14
|
radius-scheme
Advertisement
Table of Contents
