HPE FlexNetwork HSR6800 Security Command Reference page 268

Hide thumbs Also See for FlexNetwork HSR6800:
Table of Contents

Advertisement

Field
Mode
ACL
Mapped Template
Local Address
Remote Address
# Display detailed information about all IPsec policies.
<Sysname> display ipsec policy
===========================================
IPsec Policy Group: "policy_isakmp"
Interface: GigabitEthernet3/0/1
===========================================
------------------------------------
IPsec policy name: "policy_isakmp"
sequence number: 10
acl version: ACL4
mode: isakmp
-------------------------------------
encapsulation mode: tunnel
security data flow : 3000
selector mode: standard
ike-peer name:
PFS: N
transform-set name: prop1
synchronization inbound anti-replay-interval: 1000 packets
synchronization outbound anti-replay-interval: 10000 packets
IPsec sa local duration(time based): 3600 seconds
IPsec sa local duration(traffic based): 1843200 kilobytes
policy enable: True
tfc enable: False
===========================================
IPsec Policy Group: "policy_man"
Interface: GigabitEthernet3/0/2
===========================================
-----------------------------------------
IPsec policy name: "policy_man"
sequence number: 10
acl version: ACL4
mode: manual
-----------------------------------------
Description
Negotiation mode of the IPsec policy:
manual—Manual mode.
isakmp—IKE negotiation mode.
template—IPsec policy template mode.
gdoi—GDOI mode.
ACL referenced by the IPsec policy.
Referenced IPsec policy template.
IP address of the local end.
IP address of the remote end.
per
255

Advertisement

Table of Contents
loading

Table of Contents