Accounting Command - HPE FlexNetwork HSR6800 Security Command Reference
Hide thumbs
Also See for FlexNetwork HSR6800:
- Configuration manual (503 pages) ,
- Command reference manual (153 pages) ,
- Product end-of-life disassembly instructions (2 pages)
Table of Contents
Advertisement
Parameters
max-user-number: Maximum number of online users that the ISP domain can accommodate, in the
range of 1 to 2147483646.
Usage guidelines
System resources are limited, and user connections may compete for network resources when there
are many users. Setting a proper limit to the number of online users helps provide reliable system
performance.
Examples
# Set a limit of 500 user connections for ISP domain test.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] access-limit enable 500
Related commands
display domain
accounting command
Use accounting command to specify the command line accounting method.
Use undo accounting command to restore the default.
Syntax
accounting command hwtacacs-scheme hwtacacs-scheme-name
undo accounting command
Default
The default accounting method for the ISP domain is used for command line accounting.
Views
ISP domain view
Default command level
2: System level
Parameters
hwtacacs-scheme hwtacacs-scheme-name: Specifies an HWTACACS scheme by its name, a
case-insensitive string of 1 to 32 characters.
Usage guidelines
The specified HWTACACS scheme must have been configured.
Command line accounting can use only an HWTACACS scheme.
Examples
# Configure ISP domain test to use HWTACACS scheme hwtac for command line accounting.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] accounting command hwtacacs-scheme hwtac
Related commands
•
accounting default
•
hwtacacs scheme
2
Advertisement
Table of Contents
