Display Tcp-Proxy Protected-Ip - HPE FlexNetwork HSR6800 Security Command Reference

Table 77 Command output
Field
Total number of existing sessions
Session establishment rate
TCP sessions
Half-open TCP sessions
Half-close TCP sessions
TCP session establishment rate
UDP sessions
UDP session establishment rate
ICMP sessions
ICMP session establishment rate
RAWIP sessions
RAWIP session establishment rate

display tcp-proxy protected-ip

Use display tcp-proxy protected-ip to display information about IP addresses protected by the
TCP proxy function.
Syntax
In standalone mode:
display tcp-proxy protected-ip [ slot slot-number ] [ | { begin | exclude | include }
regular-expression ]
In IRF mode:
display tcp-proxy protected-ip [ chassis chassis-number slot slot-number ] [ | { begin | exclude |
include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
slot slot-number: Displays information about protected IP addresses on a card. slot-number
specifies the number of the slot that holds the card. (In standalone mode.)
chassis chassis-number slot slot-number: Displays information about protected IP addresses on a
card of an IRF member device. The chassis-number argument refers to the ID of the IRF member
device. The slot-number argument refers to the number of the slot where the card resides. (In IRF
mode.)
Usage guidelines
If you do not specify any parameter in standalone mode, this command displays information about
the protected IP addresses on all cards.
If you do not specify any parameter in IRF mode, this command displays information about the
protected IP addresses on all IRF member devices.
Description
Total number of connections.
Connection establishment rate.
Number of TCP connections.
Number of half-open connections.
Number of half-close connections.
TCP connection establishment rate.
Number of UDP connections.
UDP connection establishment rate.
Number of ICMP connections.
ICMP connection establishment rate.
Number of RAWIP connections.
RAWIP connection establishment rate.
441