Reset Hwtacacs Statistics; Reset Stop-Accounting-Buffer (For Hwtacacs) - HPE FlexNetwork HSR6800 Security Command Reference
Hide thumbs
Also See for FlexNetwork HSR6800:
- Configuration manual (503 pages) ,
- Command reference manual (153 pages) ,
- Product end-of-life disassembly instructions (2 pages)
Table of Contents
Advertisement
Examples
# Configure the IP address and port number of the primary authorization server for HWTACACS
scheme hwt1 as 10.163.155.13 and 49.
<Sysname> system-view
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] primary authorization 10.163.155.13 49
Related commands
•
display hwtacacs
•
vpn-instance (HWTACACS scheme view)
reset hwtacacs statistics
Use reset hwtacacs statistics to clear HWTACACS statistics.
Syntax
In standalone mode:
reset hwtacacs statistics { accounting | all | authentication | authorization } [ slot slot-number ]
In IRF mode:
reset hwtacacs statistics { accounting | all | authentication | authorization } [ chassis
chassis-number slot slot-number ]
Views
User view
Default command level
1: Monitor level
Parameters
accounting: Specifies the HWTACACS accounting statistics.
all: Specifies all HWTACACS statistics.
authentication: Specifies the HWTACACS authentication statistics.
authorization: Specifies the HWTACACS authorization statistics.
slot slot-number: Specifies a card by its slot number. The slot-number argument represents the slot
number of the card. (In standalone mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The
chassis-number argument represents the member ID of the IRF member device, and the
slot-number argument represents the slot number of the card. (In IRF mode.)
Examples
# Clear all HWTACACS statistics.
<Sysname> reset hwtacacs statistics all
Related commands
display hwtacacs
reset stop-accounting-buffer (for HWTACACS)
Use reset stop-accounting-buffer to clear the buffered stop-accounting requests for which no
responses have been received.
96
Advertisement
Table of Contents
