Dot1X Mandatory-Domain - HPE FlexNetwork HSR6800 Security Command Reference

<Sysname> system-view
[Sysname] interface gigabitethernet 3/0/4
[Sysname-GigabitEthernet3/0/4] dot1x handshake secure
Related commands
dot1x handshake

dot1x mandatory-domain

Use dot1x mandatory-domain to specify a mandatory 802.1X authentication domain on a port.
Use undo dot1x mandatory-domain to remove the mandatory authentication domain.
Syntax
dot1x mandatory-domain domain-name
undo dot1x mandatory-domain
Default
No mandatory authentication domain is specified.
Views
Ethernet interface view
Default command level
2: System level
Parameters
domain-name: Specifies the ISP domain name, a case-insensitive string of 1 to 24 characters.
Usage guidelines
When authenticating an 802.1X user trying to access the port, the system selects an authentication
domain in the following order: the mandatory domain, the ISP domain specified in the username, and
the default ISP domain.
To display or cut all 802.1X connections in a mandatory domain, use the display connection
domain isp-name or cut connection domain isp-name command. The output from the display
connection command without any parameters displays domain names entered by users at login.
For more information about the display connection command or the cut connection command,
see "AAA configuration commands."
Examples
# Configure the mandatory authentication domain my-domain for 802.1X users on GigabitEthernet
3/0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 3/0/1
[Sysname-GigabitEthernet3/0/1] dot1x mandatory-domain my-domain
# After 802.1X user usera passes the authentication, execute the display connection command to
display the user connection information on GigabitEthernet 3/0/1. For more information about the
display connection command, see "AAA configuration commands."
[Sysname-GigabitEthernet3/0/1] display connection interface gigabitethernet 3/0/1
Index=68 ,Username=usera@my-domian
MAC=0015-e9a6-7cfe
IP=3.3.3.3
IPv6=N/A
118