Primary Authentication (Hwtacacs Scheme View) - HPE FlexNetwork HSR6800 Security Command Reference

Hide thumbs Also See for FlexNetwork HSR6800:
Table of Contents

Advertisement

Examples
# Specify the IP address and port number of the primary accounting server for HWTACACS scheme
test1 as 10.163.155.12 and 49.
<Sysname> system-view
[Sysname] hwtacacs scheme test1
[Sysname-hwtacacs-test1] primary accounting 10.163.155.12 49
Related commands
display hwtacacs
vpn-instance (HWTACACS scheme view)

primary authentication (HWTACACS scheme view)

Use primary authentication to specify the primary HWTACACS authentication server.
Use undo primary authentication to remove the configuration.
Syntax
primary authentication ip-address [ port-number | vpn-instance vpn-instance-name ] *
undo primary authentication
Default
No primary HWTACACS authentication server is specified.
Views
HWTACACS scheme view
Default command level
2: System level
Parameters
ip-address: IP address of the primary HWTACACS authentication server in dotted decimal notation.
The default is 0.0.0.0.
port-number: Service port number of the primary HWTACACS authentication server. It is a TCP port
in the range of 1 to 65535 and defaults to 49.
vpn-instance vpn-instance-name: Specifies the MPLS L3VPN to which the primary HWTACACS
authentication server belongs. The vpn-instance-name argument is a case-sensitive string of 1 to 31
characters. If the server is on the public network, do not specify this option.
Usage guidelines
The IP addresses of the primary and secondary authentication servers must be different. Otherwise,
the configuration fails.
If the specified server resides on an MPLS VPN, specify the VPN by using the vpn-instance
vpn-instance-name option.
If you execute the command multiple times, the most recent configuration takes effect.
You can remove an authentication server only when it is not used by any active TCP connection to
send authentication packets. Removing an authentication server only affects authentication
processes that occur after the remove operation.
The VPN specified by this command takes precedence over the VPN specified for the HWTACACS
scheme.
94

Advertisement

Table of Contents
loading

Table of Contents