Display Portal User - HPE FlexNetwork HSR6800 Security Command Reference

Field
FIN_WAIT_1
FIN_WAIT_2
CLOSING

display portal user

Use display portal user to display information about portal users on a specific interface or all
interfaces.
Syntax
display portal user { all | interface interface-type interface-number } [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
all: Specifies all interfaces.
interface interface-type interface-number: Specifies an interface by its type and name.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display information about portal users on all interfaces.
<Sysname> display portal user all
Index:2
State:ONLINE
SubState:NONE
ACL:NONE
Work-mode:Stand-alone
VPN instance:NONE
MAC
---------------------------------------------------------------------
000d-88f8-0eab
Index:3
State:ONLINE
SubState:NONE
ACL:3000
Work-mode:Primary
VPN instance:vpn1
IP
2.2.2.2 0
Description
Number of connections in FIN_WAIT_1 state.
Number of connections in FIN_WAIT_2 state.
Number of connections in CLOSING state.
Vlan Interface
GigabitEthernet3/0/1
154