Cryptoengine Enable; Display Ipsec Policy - HPE FlexNetwork HSR6800 Security Command Reference

Syntax
connection-name name
undo connection-name
Default
No IPsec connection name is configured.
Views
IPsec policy view, IPsec policy template view
Default command level
2: System level
Parameters
name: Specifies the IPsec connection name, a case-insensitive string of 1 to 32 characters.
Example
# Set IPsec connection name to CenterToA.
<Sysname> system-view
[Sysname] ipsec policy policy1 1 isakmp
[Sysname-ipsec-policy-isakmp-policy1-1] connection-name CenterToA

cryptoengine enable

Use cryptoengine enable to enable the encryption engine.
Use undo cryptoengine enable to disable the encryption engine.
Syntax
cryptoengine enable [ slot slot-number ]
undo cryptoengine enable [ slot slot-number ]
Default
The encryption engine is enabled.
Views
System view
Default command level
2: System level
Parameters
slot slot-number: Specifies an interface card by its slot number.
Examples
# Enable the encryption engine.
<Sysname> system-view
[Sysname] cryptoengine enable

display ipsec policy

Use display ipsec policy to display information about IPsec policies.
253